Description
Bovi-Bond urethane hoof adhesive is a proven hoof block adhesive system for attaching blocks to the healthy claw of lame cows, helping support effective hoof treatment and recovery.
The 210 ml dual-cartridge design keeps the two adhesive components separate until they are combined in the mixing tip, helping provide a consistent mix and reliable bond when used with the compatible dispensing gun.
Application Guide
After treating the affected claw, trim the healthy claw to create a clean, flat, and dry surface. Apply approximately 20 ml of adhesive, or a 3 mm-thick layer, to the block. Press the block lightly onto the hoof and hold still for 30 seconds.
Bovi-Bond sets in approximately one minute after application and can become load-bearing after 2 to 3 minutes, or slightly longer in cold weather.
Hoof Block Removal
The block should generally be removed after 4 to 6 weeks, by which time the affected claw should have recovered if the repair has been completed correctly.
Important Information
- 210 ml Bovi-Bond adhesive cartridge for cattle hoof block bonding
- Designed for use with compatible Bovi-Bond dispensing guns and mixing tips
- Suitable for hoof care, hoof trimming, and lameness treatment support
- Dispensing guns cannot be used with older 160 ml cartridges
Bovi-Bond Cartridge Instructions
- Load the cartridge into the dispensing gun
- Unscrew the locking collar with green plug and keep it aside for reuse
- Equalise the cartridge tubes before attaching the mixing tip
- Attach the mixing tip and secure it with the collar
- After use, reseal any remaining material with the green plug and locking collar
Reviews
There are no reviews yet.